Choose your location
Set where you'd like your prefab delivered.
or enter manually
How Prefab Home Delivery & Installation Works
The single most common question we get — right after price — is “what actually happens after I order?” Fair question: you are buying a house that arrives on a truck. Here is the honest walkthrough of how delivery and setup works for a Prefabia expandable container home, and what you should have ready on your side.
The Process, Step by Step
1. Choose your model. Browse the 20ft, 30ft, and 40ft ranges — every product page lists the floor plan, expanded dimensions, materials, and engineering ratings.
2. Get your delivered quote. Send your ZIP code and model through the quote form. You receive the unit price and the delivery cost for your location — the two numbers that define the purchase (see the price guide for current ranges).
3. Confirm specs and layout. Before anything ships, you confirm the configuration — layout options, finishes, and the specification sheet you will also use for local permitting.
4. Preparation and shipping. Your home is prepared for transport at container width — that compact shipping profile is the whole point of the expandable design — and delivery to your address is scheduled with you. Timelines depend on your model, configuration, and location, so we confirm them for your specific order rather than promising a universal number here.
5. Arrival and setup. On delivery day the unit arrives by truck and is positioned on your prepared, level base. The home then unfolds into its full footprint — walls and sections expanding into the finished living space, with the kitchen, bathroom, insulation, wiring, and plumbing already installed from the factory.
6. Hookup and finishing. Your side connects utilities — water, sewer or septic, and electrical — to the home’s ready connection points, typically with a local contractor or utility provider, along with any final inspections your jurisdiction requires.
What to Prepare Before Delivery
Access. A delivery truck must physically reach your site. Measure your constraint points — gates, tight turns, steep grades, low branches or wires — and tell us about them at quote stage; access is the most common practical surprise.
A prepared, level base. The home needs a level, stable, accessible surface sized for its expanded footprint (dimensions are on each product page). Exact base requirements depend on your land and local code — settle them with your local contractor and building office during planning.
Utility planning. Decide how water, waste, and power reach the unit before it arrives — municipal connections on urban lots; well and septic on rural land.
Local approvals and timing. Line up any required permits before delivery (our permit guide covers how to research this), and coordinate contractor availability with your delivery window.
What Makes an Installation Simple — or Complicated
Easy installs share three traits: straightforward truck access, a base prepared in advance, and utilities planned early. Complexity comes from difficult access (mountain roads, tight urban lots), sloped or unprepared sites, and utility runs that were left until after delivery. None of these are dealbreakers — they are quoting and planning questions, which is why we ask about your site up front.
Delivery & Installation FAQ
How long does delivery take?
It depends on your model, configuration, and location, so we confirm the timeline for your specific order at quote stage rather than advertising one number for everyone. What we can say structurally: because the home is factory-built, your site preparation usually takes longer than the setup itself.
Do I need to hire anyone?
Plan on local help for two things: preparing the base and connecting utilities (a local contractor, electrician, or plumber depending on your setup). The home itself arrives factory-finished inside.
What if my site is hard to reach?
Tell us at quote stage — describe gates, grades, and turns. Difficult access is usually solvable with planning; discovering it on delivery day is what causes problems.
Does the price include installation?
The quote covers the home and delivery to your ZIP code. Site preparation, base, utility connections, and permits are arranged on your side because they depend entirely on your land and local rules — our price guide explains the full budget picture.
What arrives finished?
Kitchen and bathroom areas, insulation, electrical wiring, and plumbing are installed at the factory. Your side connects utilities to the ready hookup points and completes any locally required inspections.
Start With a Delivered Quote
Send your ZIP code, model, and a note about your site access — you will get the delivered price, floor plan, and full specifications.
Request a Free Quote | Contact Us | WhatsApp +1 (979) 326-2664
Related: prefab buying advice · how expandable container homes work · prefab ADUs · MOB Azure 20ft